Different data rates, formats and handshaking?
No problem with this baud rate converter
Many older devices lack the option to reconfigure baud rate
data format and handshaking. Model 232BRC acts as a translator
between asynchronous devices, matching each device’s needs while
maintaining the highest possible throughput.
Each side can be individually configured to suit the device connected to it.
The module supports any data rate up to 115.2 kbps and all standard data formats.
Each side can also supply or accept hardware or software handshaking, allowing the
higher speed device to be located on either port.
A PC is used to configure the Model 232BRC but once configured,
the module may be installed on any system. Non-volatile memory maintains
all parameters when power is removed. Each port buffers 16K bytes of data.
LED indicators on each port signals when data is present in the buffer.
The connectors are DB9 female on port A, DB9 male on port B.
Model DL-232BRC requires 12 VDC@100 mA PN:PS1UK
Specification:
Data bits: 5, 6, 7, or 8
Parity: Even, Odd, or
Stop bits: 1 or 2
Data rate: 300 bps to 115.2 Kbps
Flow control: Hardware (RTS/CTS), Software (XON/XOFF), or None
Interface: RS-232 asynchronous
Connectors: Port A (DCE) DB9 female; Port B (DTE) DB9 male
Data buffer: 16 Kbyte SRAM on each port
Configuration memory: EEPROM non-volatile memory
Power requirements: +12 to +17 VDC @ 60 mA max. (optional Model PS1UK power supply available)
Setup software: PC compatible based in Windows 95/98, NT, or 2000 operating system
Dimensions: 14.6 x 9.1 x 3.0 cm
Price: €181.72
|
Connections:
The 232BRC has two DB9 connectors. The female connector is configured as a
DCE for connecting to PCs, terminals,
and other DTE devices. The male connector is configured as a
DTE for connecting to modems and other DCE devices.
A 16 Kbyte buffer on each port ensures that data flows at the
highest rate supported by the slower device with no data
loss. Three LEDs indicate power and the presence of data in
either port’s buffer.
Typical Applications:
Connect devices with different data rates.
Convert from hardware to software handshaking.
Convert between data formats.
Add handshaking to a streaming device.
Use as a port buffer to increase throughput.
Each side of the 232BRC can be configured to match the connected device. It supports any data rate up to 115.2 Kbps
and all standard data formats. Each side can either supply or accept hardware or software handshaking, allowing the
higher speed device to be located on either port. The included PC setup software walks the user through all possible
parameters. There are no dip-switches or jumpers to configure.
|
VIEW CART!
