Overview
IAP-120 series are reliable IEEE802.11b/g WLAN Access Point with 2 ports LAN.
It can be configured to operate in AP/Bridge/Repeater/AP-Client mode.
You are able to configure IAP-120 series by WEB interface via LAN port
or WLAN interface. IAP-120 series provides dual Ethernet ports in switch
mode, so that you can use Daisy Chain to reduce the usage of Ethernet switch
ports. In addition, IAP-120 series also provides P.D. feature on ETH2 which
is fully compliant with IEEE802.3af PoE P.D. specification. Therefore,
IAP-120 series are one of the best communication solutions for wireless
applications on the industrial network.
Features
High Speed Air Connectivity: WLAN interface support up to 54Mbps link speed
Support X-Roaming less than 100 ms
Support wireless load balance
Highly Security Capability: WEP/WPA/WPA-PSK(TKIP,AES)/ WPA2/WPA2-PSK(TKIP,AES)/802.1X
Authentication supported
Support AP/Bridge/Repeater/AP-Client Mode
Switch Mode Supported: Daisy Chain support to reduce usage of switch ports
Dual redundant Ethernet port support redundant mode (Recovery time less than 10ms)
Secured Management by HTTPS
Event Warning by Syslog, Email, SNMP Trap, Relay and Beeper
Rigid IP-30 housing design
1KV isolation for PoE PD port of IAP-6002-WG+
Dual redundant DC power inputs of terminal block
Rigid IP-30 housing design
DIN-Rail and panel mounting enabled
Download Datasheet
Price: €296.00
|
Ordering Information
2 port Ethernet Client plus 1 port Wireless b/g LAN Access
Includes:
IAP-120
Typical Applications
HVAC
Industrial Control
POS Terminal
Digital Display Boards
Phone System
Card Readers
Electronic Meters
Medical Measurements
|
VIEW CART!
