Overview
PCI-104 Etherent Switch Card
The JetCard 2105 is a flexible and high performance
five-port Ethernet switch card in PCI-104 format. The
PCI-104 bus of JetCard 2105 supports both +3.3V
and +5V slot. The easy-to-install drivers that come
with JetCard make it easier for you to set up your
complex system. And with its 1.5KV Hi-pot isolation
protection, and overload current/voltage protection,
JetCard 2105 is ideal for industrial applications in
severe environments and is your best choice for
embedded networking solution.
The JetCard 2105 uses Marvell 88E6065 chip to
provide 5 Ethernet ports. Each Ethernet port in the
JetCard offers IEEE 802.3 10 Base-T and 100 Base-
Tx compliant Ethernet data transmission with auto
MDI/MDI-X and auto- negotiation.
Auto MDI/MDI-X: The JetCard automatically
determine whether or not it needs to interchange
cable sense between pairs so that an external
crossover cable is not required. If the JetCard
interoperate with a device that cannot automatically
correct for crossover, the JetCard makes the
necessary adjustment prior to commencing Auto-
Negotiation.
Flow control: The JetCard supports back-pressure
and pause frame-based flow control schemes to
ensure zero packet loss under temporary traffic congestion
Ordering Information
PCI-104 Etherent Switch Card
Includes:
5-port 10/100Mbps Fast Ethernet Switch PCI-104 card
Quick Installation Guide
Quick installation guide
Documentation and software CD-ROM
Download Datasheet
Price: €187.00
|
Features
Support 32 bit PCI-104 bus
5 ports RJ45 Ethernet Switch
IEEE 802.3 10 Base-T and 100 Base-Tx compatible
Full or half duplex at 10/100 Mbps
IEEE 802.3u Auto-Negotiation supported
IEEE 802.1Q VLAN supported
QoS supported
1.5KV Hi-pot isolation protection
-25~70oC operating temperature for hazardous environment application ( JetCard 2105-w: -40~80oC)
|
VIEW CART!
