Overview
IPMC-111PB is a cost-effective solution for the conversion interface between
10/100Base-T(X) and 100Base-FX, it allows you to extend communicationdistance
by optical fiber. IPMC-111PB supports MDI/MDIX auto detection, so you don’t
need to use crossover wires. IPMC-111PB also support Power over Ethernet, a
system to transmit electrical power up to 30 watts, along with data, to remote
devices over standard twisted-pair cable in an Ethernet network. Each IPMC-111PB
has 1x10/100Base-T(X) P.S.E. (Power Sourcing Equipment) port to provide power in
a PoE setup. IPMC-111PB with wide operating temperature range from -40°C~70°C
and accepts a wide voltage range from dual 50~57 VDC power inputs, so it is
suitable for harsh operating environments.
IPMC-111PB also supports the LFP (Link Fault Pass-through) feature.
When one side of the link fails, the other side continues transmitting
packets, and waiting for a response that never arrives from the disconnected side.
Use the DIP-Switch to enable the LFP function, then IPMC-111PB will force the link
to shutdown as soon as noticed that the other link has failed, to notice the administrator
to react to the situation. Therefore, the IPMC-111PB is reliable media converter with PoE
capability and can satisfy most demand of operating environment.
Ordering Information
IPMC-111PB
Industrial mini type Ethernet to fiber PoE media converter with 1x10/100Base-T(X) P.S.E. and 1x100Base-FX, SFP socket
Accessories
SFP100 series (required)
100Mbps SFP optical transceiver
Download Datasheet
Price: €171.00
|
Features
Supports 1 port 10/100Base-T(X) auto-negotiation and auto-MDI/MDI-X
Supports Ethernet to fiber with SFP socket
Support LFP (Link Fault Pass-through) function
Supports full/half duplex operation mode
P.S.E. fully compliant with IEEE802.3at standard, provide up to 30 Watts
Supports store and forward transmission
Provided DIP-Switch to set operation mode
High reliability and rigid IP-30 housing
DIN-Rail and panel mounting enabled
|
VIEW CART!
