Remotely manage monitor and share connected devices
over a Network or Internet.
The UDS-10 and UDS100 single-port device servers provide a quick
simple and cost-effective way to bring the advantages of data accessibility and remote
management to equipment not currently connected to a network.
With the UDS-10 any piece of equipment with a
serial port can be added to the network in a matter of minutes.
Using a method called serial tunneling,
the UDS-10 encapsulates serial data into packets and transports it over Ethernet.
Using two UDS-10s, connected by a network, virtual serial
connections can be extended across a facility or around
the world. So you can manage your equipment from virtually anywhere over
Ethernet or the Internet.
The included redirection software extends the functionality of your COM port-based
Windows® applications. With virtual COM ports, mapped to remote device servers on the
network, you can replace direct serial connections.
In modem emulation mode, the UDS-10 and UDS100 is used to replace dial-up modems.
The unit accepts modem AT commands on the serial port, then establishes a network
connection to the end device, leveraging network connections and bandwidth to eliminate
dedicated modems and phone lines. If you’re looking for a transparent,
cost-effective, and scalable means to network-enable your serial devices this is your solution.
Highlights
Replace expensive dedicated PCs with fast and reliable networking technology
Compact size enables it to fit almost anywhere
Supports RS-232, RS-422 and RS-485 serial connections
10Mbps or 10/100Mbps Ethernet through an RJ45 connector
Configure via HTTP, DHCP, Telnet or serial
Flash ROM for easy upgrades
Price: €164.56
Note, This product is no longer available, The UDS-10 part number now is UD1100-02 (device server, 100-240 VAC
International power supply with regional adapters has been updated for ROHS
compliance.)
|
Features/Specification
Protocols Supported: ARP, UDP, TCP, Telnet, ICMP, SNMP, DHCP, TFTP and HTTP
Device Support: Supports any asynchronous serial device with 7 or 8-bit data,with or without parity requiring Ethernet access
Network Interface:RJ45 (10Base-T or 10Base-T/100Base-TX) Ethernet
Serial Interface:DB25F, RS-232/RS-422/RS-485 serial port with DCE configuration
Data Rates:Serial speeds 300 bps to 115Kbps
Model Controls:RTS, CTS, DSR, DCD, DTR
Flow Control:Software XON/XOFF
Hardware CTS/RTS
Management:Internal HTTP server
SNMP (read only)
Serial login
Telnet login
|
VIEW CART!
