Data Link Communications

Industrial Networking Supply Store
Welcome to DataLink

Your Source For Data Communications Equipment




Home

Back

 VIEW CART!   

Ethernet Data Collection Terminal Keypad


Low Cost, High Performance
Ethernet
 Call or email for pricing!
Ethernet Based Data Collection Terminal


These compact keypad terminals can be panel mounted, workbench or wall mounted, or free-standing. There is a weather -resistant version suitable for outdoor use. All versions have a backlit display and sealed, configurable keyboard. They are engineered for monitoring, data collection, access control, and general operator interfacing applications in the industrial and commercial environment. The Ethernet port can be configured either as a client or server. All settings are configurable via Ethernet. The RS232 port can be used for the connection of barcode scanner, printer etc. and supports file transfer. There are 2 relay outputs and 4 opto-isolated digital inputs. Each input also counts at up to 250 cycles/second and measures cycle time. The status of each input, count value, and cycle time value can be requested by the host system, and counters can be reset individually.

All keypad terminals are available with special keyboard overlays at no extra cost (when specified at the time of manufacture). Graphic templates can be downloaded from our website to be configured directly by the customer (using CorelDrawTM ) in full colour. By adding a logo and creating new key legends the look of the product is totally transformed. The completed design is emailed to our manufacturing department for incorporation into the product. The design is given a unique number for identification when re-ordering.
Dimensions
4 x M4 Studs
17mm long behind panel

Mounting Details Fixing Centres
118 mm Horizontal
112 mm Vertical

Panel Cut-out
106 mm Horizontal
146 mm Vertical

Depth Behind Panel
35mm (52mm incl terminals) 		Panel Mount


Desk-Top Version

Dimensions 134w x 190 x 55(rear), 34(front) mm.
Wall Mount Enclosure
The ELX wall mount enclosure comprises 2 sections with an O ring seal to preserve IP65 sealing. The ELX fits to the front part permitting the rear section to be installed separately. The material is ABS. Can also be fitted with MagCard or BarSlot card swipe reader.
Dimensions 136w x 182 x 82 mm


Specification
Power Supply Requires unregulated 10 to 30v dc, 3 watts max. A mains PSU is supplied as standard. (Specify UK or European version) Display 4 lines x 20 characters with backlighting, character height 4.5mm Keyboard 26 key tactile sealed. Customisable. Communications Ethernet Port: (RJ45) TCP/IP. Select Server or Client mode. Automatically selects10 baseT or100 baseT communications according to host system. RS232 Port : (DB9 Male) 300-38400 baud. 8,N,1 or 7,E,2, RTS/CTS or XON/XOFF handshaking. +5v at up to 300mA is connected to pin 9 to provide power for an external device. Swipe Reader Port : (3 way Pluggable Screw Terminals) 9600 Baud 8, N, 1 for connection to integrated MagCard and BarCode swipe readers or RFID reader. Connections provided – 0v, Signal, +5v. The +5v connection can supply up to 300mA to power the reader – WARNING this is the same connection as pin 9 of the RS232 port and the maximum combine current capability is 300mA. I/O Connections IO Port : (10 way Pluggable screw terminals) 4 Opto-isolated inputs. 6v to 30vdc = ON. All inputs are also configured as counters (there are separate commands to read status and counter values). (Operating frequency 0 to 250 Hz, counts to 99999999 and roll-over, cycle time measured in mS to 99999.999s). Reset on power loss. Debounce settable from 1mS to 1000 mS. Count on rising or falling edge. 2 Relay Outputs Normally open contacts rated 2A (Max 50v). Temperature -10 to + 60 deg C (-20 to 80 deg C Storage) Humidity 20% to 95% RH non-condensing V Housing Version Protection Front IP54, rear IP20 Panel-Mount Version Protection Front IP65* (Behind panel protection is IP20) Wall Mount Protection IP65* Certification CE *Outdoor Use requires high-performance keyboard overlay – price on application

Order Codes
  • EELX Panel mount version.
  • WMX Wall Mount Enclosure for EELX versions.
  • EELV Versatile housing version.
  • BJL Long ball-joint mounting bracket for EELV models
  • BJS Short ball-joint mounting bracket for EELV models


    • Contact:
    DataLink Communications
    Cloghaun, Kilchreest, Loughrea, Co. Galway, Ireland
    Email: sales@datalinkcom.net     Tel: +353-91-840838     Fax: +353-91-840839